Folungwin FL-MD450 Worlds Best Selling Machine

Folungwin are one of the worlds most established manufacturers of wave soldering systems. The have the largest market share of this level of machine according to an independant survey carries out (Copies available upon request). The MD-450 is a very complete production machine and makes Lead Free Soldering as easy as 1-2-3. Already with a large installation base in Italy where the products have been distributed for 2 years, DNA Automation Ltd now bring to the UK and Republic of Ireland this fantastic product.

• Large PCB Width of 450mm
• Conveyor speeds from 100-2000mm/min
• 3 Independent Forced air convection pre-heating zone, overall length 1.8M
• Computerised Conveyor width adjustment
• Automatic Finger Cleaner
• Stepper Motor driven Spray Fluxer
• Lead Free Dual Wave Solder Pot as Standard
• Adjustable wave height controlled via Computer
• Automatic Low Level solder detection
• Roll-Out Solder pot as standard
• Max Solder pot temperature of 300degC
• PCB Conveyor Height 650mm +/-20mm
• Flux Capacity approx 20Ltr
• Solder pot capacity of 450Kg
• Low power consumption of 16kW, Max 30kW on start up

• Options
• Centre Board Support
• Cold Air Chiller
• Nitrogen Hood option

EMS 321 Floor Standing Medium Volume Flow Soldering Machine

The EMS Stallion321 is an rigid production machine. Designed specifically for lead free soldering and with the operators in mind the Stallion 321 is not only a simple machine to operate but also easy to maintain too. With two preheat zones, one being hot air convection the machine easily achieves a perfect lead free profile with little trouble at all. Longer than the Stallion 320, the 321 is capable of more complex boards and a faster throughput. The O-Wave option offers the best soldering results for SMT components eliminating skips, icicles, bridges or solder build-up. It can solder boards of 304mm in width, 406mm in length and components up to 80mm in height. Easy access for maintenance and a roll out solder pot. Many other features found only on machines of double the price!

• Micro controller based control panel with 32 key keyboard and large LCD panel
• 99 PCB Profile storage & RS232 interface for data management info
• Pallet conveyor for max pcb width 304mm
• 3, 4 & 5 deg adjustable conveyor angle
• Foam fluxer with 5ltr stainless steel tank
• 2 Stage preheater, 1 hot air convection & 1 IR with independent PID control
• Cooling Zone with radial fans on exit
• Lead Free compatible solder pot of 170Kg solder capacity
• Stanadard mono directional dry wave
• Roll-Out Solder pot as standard
• 3 Phase 415V, 50Hz, power supply, 12Kw consumption
• Easy to Use, low maintenance & easy access
• PCB Size: 406mm x 304mm, optional carriers can be ordered to incread PCB length

• Options
• O-Wave for SMD and hard to solder devices
• Auto Wave On
• Titanium Tank, pump, impeller & nozzle for lead free soldering.
• Longer carrier for boards over 406mm in length.
• Constant level controller - for maintaining flux at a constant level in the tank.
• Auto density controller - for control of density of RMA flux.
• Spray Fluxer

EMS 310 Entry Level Floor Standing Flow Soldering Machine

The EMS Stallion310 is an excellent, compact, economical floor standing machine. Mechanically based on the well known bench-top, this machine is specifically designed for lead free soldering. . The O-Wave option offers the best soldering results for SMT components eliminating skips, icicles, bridges or solder build-up. It can solder boards of 304mm in width, 406mm in length and components up to 80mm in height. Easy access for maintenance and a roll out solder pot. Many other features found only on machines of double the price!

• Micro controller Based Control Panel with 32 key keyboard and large LCD Panel
• 99 PCB profile storage & RS232 interface
• Pallet conveyor for max pcb width 304mm
• 3, 4 & 5 deg adjustable conveyor angle
• Foam fluxer with 5ltr stainless steel tank
• 1 IR Pre-Heater with independent PID control
• Stainless steel solder pot of 170Kg solder capacity
• Stanadard mono directional dry wave
• Roll-Out solder pot as standard
• 3 Phase 415V, 50Hz, power supply, 6Kw consumption
• Easy to Use, low maintenance & easy access, ideal entry level machine
• PCB Size: 406mm x 304mm, optional carriers can be ordered to incread PCB length

• Options
• O-Wave for SMD and hard to solder devices
• Auto Wave On
• Titanium Tank, pump, impeller & nozzle for lead free soldering.
• Longer carrier for boards over 406mm in length.
• Constant level controller - for maintaining flux at a constant level in the tank.
• Auto density controller - for control of density of RMA flux.
• Spray Fluxer

EMS 300 Bench-Top Entry Level Flow Soldering Machine

The EMS Stallion is a compact, economical simple benchtop wave soldering machine designed for soldering of conventional leaded components and surface mounted devices ( SMD ). The O-Wave option offers the best soldering results for SMT components eliminating skips, icicles, bridges or solder build-up.The EMS Stallion is compact, has its own built in ait pump and operates on a bench . It can solder boards of 304mm in width, 406mm in length and components up to 80mm in height.

• Dimensions: L=1730mm, W=880mm,H=660mm
• PCB Size: 406mm x 304mm, optional carriers can be ordered to incread PCB length.
• Conveyor Speed: 0-2M/min.
• Fluxer: Internal Foam Fluxer with integral air supply-No compressor needed!
• Power: 5KVA Maximum

• Options
• O-Wave for SMD and hard to solder devices
• Auto Wave On
• Titanium Tank, pump, impeller & nozzle for lead free soldering.
• Longer carrier for boards over 406mm in length.
• Constant level controller - for maintaining flux at a constant level in the tank.
• Auto density controller - for control of density of RMA flux.
• Spray Fluxer

IVASTECH Hot bar Soldering Machine

A bespoke application, originally designed specially for soldering Philips Luxeon Emitters. We represent Ivastech, who not only manufacture SMT Pick & Place machines but also manufacture specialist applications, not matter what it is, with our experience together with that of IVASTECH we can have a machine purpos built to match your application. The Hot Bar Soldering machine is just one example of the capabilities of IVASTECH

Designed specially for the soldering of Luxeon Emitters, this machine can be adapted for any purpose.
Stage 1. Dispenses glue which helps transfer heat to the backplane the emitters are mounted on.
Stage 2. Dispenses flux onto each pad of the emitter
Stage 3. Picks the emitters from the feeders, aligns them using vision and places them using a dedicated nozzle.
Stage 4. The dedicated hot bar soldering head moves to each position and solders all diodes from the information supplied by the CAD data and library.

ESJ2 Easy Solder jet 2 Selective Soldering/Desoldering Machine

The Easy Solder Jet 2 is a hand made well built machine from Switzerland. In true Swiss style this bench-top selective soldering/de-soldering machine is built to high standards. With interchangeable nozzles the Easy Solder jet 2 makes it the ideal complement to any rework section of your production.

• Adjustable wave height
• Lead free ready
• Interchangeable nozzle
• Adjustable PCB holder
• Ideal for soldering/de-soldering of difficult devices such as through-hole connectors
• Single Phase

Far Right: Adjustable PCB Holder & Optional Pre-heater Below Left: Example of Nozzle Below Right: Example of nozzle for long connector