Quad QSA30A Overhauled & Rebuilt

This popular machine boasts 13'300cph. 3 laser alignment heads centering devices up to 25mm square.Excellent flexible placer. Machine will be available mid July after it has been brought back to our warehouse, stripped down and overhauled.

Features:

• 0.28 sec/comp 13'000cph (Optimum)
• Non contact on the fly optical centering system
• Accurately places devices up to 25mm square (Laser Align)
• Up to 86 x 8mm Quad Feeders can be fitted
• Large PCB size 450mm x 400mm
• Single Stage conveyor system
• CAD interface as standard
• Compact footprint, only 1540mm(W) x 1660mm(L)
• A selection of nozzles as standard to handle a wide
variety of component

Additional Features:

• Takes Standard 20mm width Quad Electric Feeders
• Great addition to any Existing Quad line to add capacity
• Machine is fully overhauled by our Experts
• PC System has been replaced with NEW and a new architecture making it up to date thus reducing the risk of future PC failure causing downtime
• Latest Software has been loaded
• New set of common nozzles
• Fully tested & rebuilt

• Up to 3500cph (Optimum)
• Non contact on the fly optical laser centering system
• Accurately places devices up to 26mm square (Laser Align)
• 0.4mm lead pitch of larger components by use of fixed vision camera.
• Up to 76 x 8mm feeders
• Large PCB size 457mm x 660mm
• In Out Shuttle with pin edge registration
• Compact footprint, only 1850mm(W) x 1320mm(L)
• A selection of nozzles as standard to handle a wide
variety of components
• Automatic Matrix Tray handler with each machine

CP33LV Overhauled

The CP33LV was the first serious touchless centering production machine from STW. With 3 laser alignment heads centering devices up to 25mm square and an upward vision camera for larger and fine pitch devices making the CP33LV and excellent flexible placer. Machine will be available mid July after it has been brought back to our warehouse, stripped down and overhauled.

Features:

• 0.28 sec/comp 13'000cph (Optimum)
• Non contact on the fly optical centering system
• Accurately places devices up to 25mm square (Laser Align)
• 0.4mm lead pitch of larger components by use of fixed vision camera.
• Up to 104 x 8mm feeders
• Large PCB size 450mm x 400mm
• Single Stage conveyor system
• CAD interface as standard
• Compact footprint, only 1540mm(W) x 1660mm(L)
• A selection of nozzles as standard to handle a wide
variety of component

Additional Features:

• Takes Standard CP Feeders, all types: NA/NB/SB/PB
• Great addition to any Existing line to add capacity or fine pitch
• Machine will be fully overhauled by our Experts
• PC System will be fully replaced making it up to date thus reducing the risk of future PC failure causing downtime
• Latest Software will be loaded
• Fully tested & rebuilt

TWS Quadra Automatic Fiducial Recognition

Great Little TWS Quadra with Automatic Fiducial Recognition. Overhauled and in great condition.
Good machine either for start up, Prototyping or low volume production.

Features:

*-Complete with loads of feeder banks
*-Several stick feeder banks
*-Small Footprint
*-Large Board Capability
*-Large Component Range
*-Very reliable machine
*-Flexible placer
*-Great add on for existing Quadra User
*-CE Marked
*-Automatic Fiducial Recognition of almost any mark using greyscale system
*-Automatic Glue Dispenser, dispenses glue or paste from Placement co-ordinates

We have almost 10 years experience with these machines and have installed over 50 systems. This mahcine has been overhauled and some small consumables purchased to enable accurate calibration.

• 0.28 sec/comp 13'000cph (Optimum)
• Non contact on the fly optical centering system
• Accurately places devices up to 26mm square
• Up to 76 8mm QUAD feeder capacity
• Large PCB size 450mm x 400mm
• Single Stage conveyor system
• CAD interface as standard
• Compact footprint, only 1540mm(W) x 1660mm(L)
• A selection of nozzles as standard to handle a wide
variety of components

• 0.28 sec/comp 13'000cph (Optimum)
• Non contact on the fly optical centering system
• Accurately places devices up to 26mm square (Laser Align)
• 0.4mm lead pitch of larger components by use of fixed vision camera.
• Up to 76 x 8mm feeders
• Large PCB size 450mm x 400mm
• Single Stage conveyor system
• CAD interface as standard
• Compact footprint, only 1540mm(W) x 1660mm(L)
• A selection of nozzles as standard to handle a wide
variety of components

• Up to 3500cph (Optimum)
• Non contact on the fly optical laser centering system
• Accurately places devices up to 26mm square (Laser Align)
• 0.4mm lead pitch of larger components by use of fixed vision camera.
• Up to 76 x 8mm feeders
• Large PCB size 457mm x 660mm
• In Out Shuttle with pin edge registration
• Compact footprint, only 1850mm(W) x 1320mm(L)
• A selection of nozzles as standard to handle a wide
variety of components
• Automatic Matrix Tray handler with each machine

• Quad ZCR 4 Zone Reflow Oven

• Quad ZCR 941, 4 Zone Reflow Oven, Computer Controlled.